SWG RED
2018-2021 ReD Team

Current Publications

2021

  1. Han and D. Allaei, “Performance of Adaptable Lightweight Impact Proof Plates,” 91st Shock and Vibration Symposium (SAVE 2021), abstract, Orlando, FL September 2021.
  2. Reydel, and D. Allaei, “Reusable, High Performance Honeycomb for Airdrop Applications,” 91st Shock and Vibration Symposium (SAVE 2021), abstract, Orlando, FL September 2021.
  3. Han, J.D. Rall, and D. Allaei, “Fluid dynamic model of rubber-based damping structure for impulse noise reduction”, Inter-Noise 2021, abstract, August 2021.
  4. Reydel, D. Allaei, and J.D. Rall, “High Lift Device Modifications for Reducing Airport Noise – A Review,” Inter-Noise 2021, abstract, August 2021.
  5. Demerville and D. Allaei, “Applications of Passive Solutions to Micro Vibration Mitigation in Space Applications,” ICSV27, July 2021.
  6. Allaei and J. Rall, “Degradation of Sailor Performance due to Noise and Vibration at their Berthing Quarters – A Review and Recommended Approach,” ICSV27, July 2021.

 

2020

  1. J.D. Rall, B. Reydel, and D. Allaei, “Passenger acceptance of VTOLs for UAM,” Noise Control Engineering Conference (NOISE-CON 2020), full paper in the conference proceedings, e-conference, November 2020 (accepted for publication).
  2. J.D. Rall, and D. Allaei, “Application of CLD for reduction of structure-borne noise in electronic enclosures,” Noise Control Engineering Conference (NOISE-CON 2020), full paper in the conference proceedings, e-conference, November 2020 (accepted for publication).
  3. D. Allaei and J.D. Rall, “Degradation of Sailor Performance due to Noise and Vibration at their Berthing Quarters
    – A Review and Recommended Approach,” Noise Control Engineering Conference (NOISE-CON 2020), full paper in the conference proceedings, e-conference, November 2020 (accepted for publication).
  4. T. Demerville, and D. Allaei, “Application of Passive Solutions to Micro Vibration Mitigation in Space Applications,” Noise Control Engineering Conference (NOISE-CON 2020), full paper in the conference proceedings, e-conference, November 2020 (accepted for publication).
  5.  T. Demerville and D. Allaei, “Micro Vibration Mitigation in Space Applications,” ISMA-USD Noise and Vibration Engineering Conference 2020, full paper to be published in the conference proceedings, e-conference, September 2020.
  6. D. Allaei, and J.D. Rall, “Influence of Noise and Vibration on Sailor’s Performance,” ISMA-USD Noise and Vibration Engineering Conference 2020, abstract, e-conference, September 2020
  7. J.D. Rall, and D. Allaei, “Application of CLD for Reduction of Structure-borne Noise in Electronic Enclosures,” Inter-Noise 2020 e-congress, abstract, e-conference, August 2020.
  8. D. Allaei, and J.D. Rall, “Quiet Bunk for Restful Sleep in Submarines,” Inter-Noise 2020 e-congress, abstract, e-conference, August 2020.
  9. J.D. Rall, B. Reydel, and D. Allaei, “Passenger Acceptance of VTOLs for UAM,” Inter-Noise 2020 e-congress, abstract, e-conference, August 2020.

 

2019

  1. J.D. Rall, L. Mallet, P. Lamy, and D. Allaei, “SMACSONIC – An Effective Layered Damping Material,” 90th Shock and Vibration Symposium (SAVE 2019), abstract, Atlanta, GA, November 2019.
  2. D. Allaei, “Elasta Mega Isolation Mounts (EMIM) for Heavy Payloads,” 90th Shock and Vibration Symposium (SAVE 2019), abstract, Atlanta, GA, November 2019.
  3. J.D. Rall, D. Gjoreski, K. Kayayan, and D. Allaei, “Isolation of Ultralight-Weight Electronics Enclosures,” 90th Shock and Vibration Symposium (SAVE 2019), abstract, Atlanta, GA, November 2019.
  4. R. Rakowski, K. Kayayan, and D. Allaei, “Performance of Cup Isolation Mounts Subjected to Cold-Hot Temperatures,” 90th Shock and Vibration Symposium (SAVE 2019), abstract, Atlanta, GA, November 2019.
  5. L. Mallet, P. Lamy, D. Allaei, “An Effective Passive Noise and Vibration Control Material,” Noise Control Engineering Conference (NOISE-CON 2019), full paper in the conference proceedings, San Diego, CA, August 2019.
  6. D. Gjoreski, K. Kayayan, D. Allaei, “Analysis and Evaluation of Isolation for Shipboard Electronics,” Noise Control Engineering Conference (NOISE-CON 2019), full paper in the conference proceedings, San Diego, CA, August 2019.
  7. R. Rakowski, K. Kayayan, D. Allaei, “Influence of Temperature on Hybrid Cup Isolation Mounts,” Noise Control Engineering Conference (NOISE-CON 2019), full paper in the conference proceedings, San Diego, CA, August 2019.
  8. L. Mallet, P. Lamy, D. Allaei, “SMACSONIC – An Effective Noise and Vibration Mitigation Material,” 26th International Congress on Sound and Vibrations (ICSV26), full paper in the congress proceedings, Montreal, Canada, July 2019.
  9. D. Gjoreski, K. Kayayan, D. Allaei, “Design and Evaluation of Isolation of Lightweight Shipboard Electronics,” 26th International Congress on Sound and Vibrations (ICSV26), full paper in the congress proceedings, Montreal, Canada, July 2019.
  10. R. Rakowski, K. Kayayan, D. Allaei, “Influence of Temperature on Performance of Cup Vibration Isolation Mounts,” 26th International Congress on Sound and Vibrations (ICSV26), full paper in the congress proceedings, Montreal, Canada, July 2019.
  11.  D. Allaei, L. Mallet, and P. Lamy, “SMACSONIC An Effective Noise, and Vibration Mitigation Material,” TechConnect2019, abstract, Boston, MA, June 2019.

Please contact us to learn how our technology and Shocktech ReD team can be of help and benefit your organization.

Meet us in Orlando at SAVE

WWW.SAVECENTER.ORG

SWG-ReD will be presenting at the 91st Shock & Vibration Symposium (SAVE) Sept 19-23
Presentations include:
• PERFORMANCE OF ADAPTABLE LIGHTWEIGHT IMPACT-PROOF PLATES

• REUSABLE, HIGH-PERFORMANCE HONEYCOMB FOR AIRDROP APPLICATIONS

• DYNAMIC SIMULATIONS FOR AIRDROP PLATFORM

Visit us at our exhibit booth #308

Can we help you?

We are happy to answer your questions to determine how our services can meet your needs.